How To Get Rid Of Weed Seeds In Soil

Learn how to kill weed seeds in soil to prevent weeds and other invasive grasses from continuing to sprout every year. Soil solarization is an organic method of killing weeds before they even sprout. Use this method of weed control when starting from scratch. How to Kill Weed Seeds in Compost Ideally, you wouldn’t add weeds that are in seed or even in the late part of their blooming cycle to the compost pile. Thus you can avoid the problem of their

How to Kill Weed Seeds in Soil [5 Easy Methods]

To kill weed seeds in soil you will have to apply one or more of the following methods:

  • Heat soil to temperatures high enough to kill weeds seeds
  • Force seeds to sprout and destroy growing weeds
  • Apply chemical or natural weed killers that prevent weeds from sprouting
  • Use flame weeding to destroy weeds and seeds at once
  • Layer mulch in garden areas to suppress weed sprouting and attract insects that eat seeds

With this arsenal of tricks for killing weed seeds before they sprout, you can stop the spread of weeds in both your lawn and garden.

Table of Contents

5 Tips for Killing Weed Seeds

Rather than spending time and effort battling weeds as they sprout, attack weeds at the source by killing weed seeds. Each of these methods destroys weed seeds, which ensures you won’t have to battle recurring weed invasions. Try these ways to get rid of weed seeds yourself.

Solarization

Soil solarization is a very powerful method for killing weed seeds. Weed seeds begin to die if soil temperatures surpass 108 degrees, with full seed death ensured by soil surface temperatures of 140 degrees or more. Solarization uses clear plastic tarps to trap heat at the soil surface, killing weed seeds within the tarped area. To solarize an area, follow these steps:

  • Clear the area of all vegetation through use of a hoe or other garden implement. Remove any woody stumps
  • Till the soil to further break up any weed root systems left behind.
  • Rake away all vegetation residue
  • Water the tilled and cleared soil with a garden hose until it is damp.
  • Lay a sheet of clear plastic over the area. Weigh it down tightly at the edges
  • Leave the plastic in place for at least two months.

Solarization is the best method to reclaim a weedy garden or other area. It is a “clean slate” for your soil, because seeds will be destroyed by the solar heat trapped beneath the plastic.

It is typically tough to implement solarization in large areas and is not usually suitable for use in lawns, where you may want to preserve grass or other plants. Pre-emergent weed killers and flame weeding are much better for use in lawns.

Till and Kill

Weed seeds can lie dormant in soil for decades and are only “activated” when brought to within an inch of the surface. One method to rid soil of dormant weed seeds is to force these dormant seeds to sprout, then attack them with a powerful natural or chemical weed killer. To do this:

  • In spring, till the affected area. Tilling brings dormant seeds to the surface
  • Water the area for 1–2 weeks with a sprinkler or soaker hose
  • When weeds begin to sprout, apply the weed killer of your choice

This is another “clean slate” method, where you force weed seeds to show themselves and then kill young weeds before they mature and cast seeds. Because of the invasive tilling step, it is not best used in areas with desirable grasses and plants.

See also  Weeds And Seeds Banff

Use Pre-Emergent Weed Killer

Pre-emergent weed killer stops weeds in their tracks. It works by attacking weed seeds just as they begin to germinate, killing them before they even poke above the surface. It’s a weed killer so good, the only sign it’s working is that there will be no new weeds at all.

How to Use Soil Solarization to Kill Weeds

David Beaulieu is a landscaping expert and plant photographer, with 20 years of experience. He was in the nursery business for over a decade, working with a large variety of plants. David has been interviewed by numerous newspapers and national U.S. magazines, such as Woman’s World and American Way.

RichLegg / Getty Images

Soil solarization is a preventive, organic method of killing weeds before weed seeds even sprout.   But the advice below is also meant for homeowners wishing to start a garden with a clean slate, reclaiming a patch of land where weeds have taken over, in such a way as to reduce to a minimum the hassle of future ​weed control. Want to transform a piece of land that has “gone to pot” into usable space? Then the method explained below may be the solution to your problems.

Preparation

There is lots of work involved since soil solarization entails getting to the root of the problem, underground.   And we will not be taking the shortcut of using herbicides, so that means a bit more work. But if you do not mind getting your hands dirty, then let’s roll up our sleeves and begin stopping our weedy foes in their tracks.​

First hack down the tall vegetation with a sickle, power trimmer, etc. But before doing so, make sure you know how to identify poison ivy, poison sumac, etc.

If there are shrubs and trees present, cut them down with an ax or chainsaw. The ground needs to be smooth before you begin soil solarization (since you will be spreading plastic over it), so you will also have to remove the stumps left behind. If you are looking for a cheap way, use a tool called a “mattock.” Dig and chop your way with the mattock under the root-ball to access and remove the taproot. Warning: this is hard work and may be feasible only for smaller stumps.

Run a mower over the land to reduce the weeds’ height further. Now that all the weeds are as short as possible and the stumps have been removed, rent a large tiller to uproot all the weeds. Since this plot of ground is uncultivated soil, you will need a tiller that has some power: Do not undertake this task with a small garden cultivator! Allow the tiller’s tines to dig deep enough into the ground to loosen the weeds, so they can be removed—roots and all, if possible.

Now use a steel rake on the area that you have just tilled, wielding it like a fine-toothed comb to remove the majority of the uprooted weeds. Next, rake the area again, this time with the object of evening out the soil as best you can and removing stones, twigs, etc. The final preparation for soil solarization will require the use of a garden hose. According to the University of Idaho Extension (UIE), you should moisten the area that you have just raked to “conduct and hold heat, to stimulate weed seed germination, and to prevent dormancy of below-ground vegetative plant parts.”

Killing Weeds Through Soil Solarization

Perhaps you are wondering at this point, “Why do I need soil solarization? Why can’t I just lay landscape fabric at this point, punch some holes in it, plant my new plants and then cover with mulch?” Well, the reason you can’t is that your job of killing weeds has only just begun. Weed seeds that you can’t even see are lurking beneath the surface, just waiting to sprout. If the weeds are vigorous enough, they will find a way back to the light (remember, the integrity of the landscape fabric will be compromised when you punch holes in it for your new plants). So you need to kill those seeds before you proceed with laying landscape fabric. And that is a job for soil solarization.

See also  Soaking Weed Seeds In Water

Cover the raked, moistened area with a clear polyethylene sheet. The edges of the sheet can be held down by cinder blocks to keep the plastic from blowing away. If the raking mentioned above was done diligently enough, there will be no sharp objects sticking up to puncture the plastic. The sheet of clear plastic can be anything from 1 to 6 mil. in thickness. In the Northern hemisphere, the best time for soil solarization is June and July, when the sun is at its peak. UIE recommends keeping the sheet of clear plastic tightly stretched out over the area for about 2 months. During that time, the sun will be killing weeds for you—”cooking” them before they have a chance to sprout. Plant pathogens will be killed, to boot.

Now you truly have a “clean slate” with which to work. Remove the plastic and lay down landscape fabric. You should try to use one of the stronger types of landscape fabric if possible, just in case—in spite of your best efforts—any sharp objects remain in the ground (which would puncture the landscape fabric).

When you cut slits in the landscape fabric and install new plants, be careful that you don’t get dirt all over the landscape fabric. After all, why prepare a home for airborne seeds? Sure, you will be applying mulch. But airborne weed seeds can wend their way through mulch particles. If they find dirt, then they are “weeds waiting to happen.”

Of course, if you use an organic mulch (such as a bark mulch), it will eventually decompose anyhow, becoming fertile ground for weeds. What can you do? Well, you had better keep new weeds pulled, faithfully. Vigorous roots pushing downwards can stress landscape fabric and breakthrough. On the bright side, these weeds should be relatively easy to pull, since mulch is a lot looser than dirt, and weed roots will not become impossibly entrenched.

Speaking of mulch, applying a layer of it over your landscape fabric is the final step in this project. Do not pile up mulch heavily around newly planted trees or shrubs; it invites diseases. When old mulch decomposes it needs to be removed and replaced with new mulch.

The Spruce uses only high-quality sources, including peer-reviewed studies, to support the facts within our articles. Read our editorial process to learn more about how we fact-check and keep our content accurate, reliable, and trustworthy.

How to Kill Weed Seeds in Compost

Ideally, you wouldn’t add weeds that are in seed or even in the late part of their blooming cycle to the compost pile. Thus you can avoid the problem of their seeds germinating in the garden when you later use the compost you produced. But sometimes, you have little choice: perhaps the most easily available compostable material (horse manure, hay, etc.) contains seeds or else the endless sorting of weeds according to their “seediness” would just be too complicated. Or, like me, you just feel that everything organic should be composted.

See also  Moon Rock Weed Seeds

Fortunately, there are other solutions.

A Big, Hot Pile

A compost pile that gives off water vapor is working hard to kill weed seeds. Source: Anatomy of Living, http://www.youtube.com

In general, the bigger the compost pile, the more heat it produces … and heat kills seeds, even weed seeds.

After a week at 130 ° F (55 ° C)*, most weed seeds will be dead, but it takes a month at 145° F (63 ° C) or more to kill the most resistant ones. Curiously, most common weeds actually produce seeds that are fairly easy to kill and they’ll die at relatively low temperatures. That’s the case with dandelions (Taraxacum officinale) and Canada thistle (Cirsium arvense), for example.

*Note that such temperatures will also kill any weed roots and rhizomes placed in the compost. Two birds with one stone!

Heat-resistant weed seeds requiring treatment at 45° F (63 ° C) include:

  • Bird’s-eye speedwell (Veronica persica)
  • Broadleaf dock (Rumex obtusifolius)
  • Common groundsel (Senecio vulgaris)
  • Common lambsquarters (Chenopodium album)
  • Field bindweed (Convolvulus arvensis)
  • Ladysthumb (Polygonum persicaria, now Periscaria maculosa)
  • Round-leaved mallow (Malva pusilla)
  • Spiny sowthistle (Sonchus asper)
  • Wild buckwheat (Polygonum convolvulus, now Fallopia convolvulus)

To find out if your compost pile heats up enough to kill weed seeds, simply insert a compost thermometer into it and note the temperature. If you don’t have a compost thermometer, try sinking your hand into the pile. If it’s so hot you to feel uncomfortable, it’s heating up enough.

Do not forget to return the pile regularly, not only because that helps to oxygenate it and thus stimulates microbial life, leading to and maintaining higher temperatures, but also so the ingredients on the outside of the pile, where it’s cooler, can also get their full heat treatment.

Note too it may be necessary to water your compost pile from time to time. Compost heats most efficiently when it is neither dry nor wet, but moderately moist.

When the Pile Is Not Heating Up Enough

The compost bins commonly sold generally can’t hold enough material to ensure high temperatures. If you’re using one, you’ll have to resort to other methods if you want to kill weed seeds in your compost.

Bury compost to prevent weed seeds from germinating. Source: thelegitimatenews.com

It’s important to understand is that weed seeds* can only germinate when exposed to light. If you are concerned that your compost might contain viable weed seeds, simply bury it when you use it, covering it with soil or, if you apply it to the surface, cover the compost with mulch. Problem solved!

*Warning: unlike annual and perennial weed seeds, a few tree seeds, especially nuts, will germinate when covered with soil or mulch.

You can also kill the seeds at the end of a composting cycle by solarization. To do this, spread the compost on a very sunny surface and cover it with a sheet of transparent plastic, holding the plastic in place with rocks or bricks. That will quickly create a greenhouse effect and very high temperatures. Even if there is some germination at first, the heat underneath the plastic will be such that it will soon kill both the seedlings and any remaining seeds, leaving you with weed-free compost you can use as you want.

With these methods in mind, you can dare to add weeds at any stage of their life to your compost pile.