How To Germinate Weed Seeds

We show you in this post how to properly germinate your marijuana seeds. You only have to follow these 8 steps and have a little patience to save time Figuring out how to germinate weed seeds isn't that hard, but choosing the right method can determine exactly how high your success rate is. Learning how to germinate cannabis seeds is essential to all future growing success. Properly popping beans puts you on the road to healthy plants and heavy harvests. But there are a few things to consider in order to master how to germinate cannabis seeds the right way.

How to germinate marijuana seeds

Alchimia Grow Shop is always trying to offer a wide and comprehensive seed catalogue , keeping our seed stock in the best storing conditions and thus achieving the best germination ratios of cannabis seeds.For this reason, we constantly renew our stock and never let our seeds to spend more than 6 months in our cooling chambers, so we can guarantee that the seeds you are buying have a maximum storage period of 6 months. Of course, we have a controlled enviroment inside our cooling chambers.However, from time to time, some germination problems may occur. We invite you to tell us any problem that you have, so we can start our scheduled germination tests for this cases and proceed to make a claim to the involved seedbank.

How to germinate marijuana seeds

To ensure that the problem comes from the seed and not from our germination system, we recommend to follow these steps to correctly germinate your seedlings:1.- Take a dish or any flat container and some paper napkins.

Paper napkins and water

2.- Place your seeds between two paper napkins.

Place the seeds between two napkins

3.- Wet the napkins and keep them humid for the next 3/4 days. You can use a mixture of 100ml of tap water with 1ml of hydrogen peroxide.

Moisten both napkins

4.- After 3-4 days, you can see that your seeds have sprouted. If they haven’t, replace the napkins for new ones, also humid.

5.- Soak some jiffys (peat pellets) in tap water to hydrate them. This process takes a few minutes. You can add some root stimulator to the water (follow manufacturer’s instructions).

Soak your jiffys in water to hydrate them

6.- Once your peat pellets are hydrated, make a small hole on each of them and gently place the germinated seeds in the holes, always with the small root downwards (see picture). Cover the seeds with a thin layer of substrate (about 5mm).

Put one seed in each jiffy

7.- With a little bit of patience, after 3-4 days we will se the first plants sprouting.

Young plants sprouting after a few days

8.- After a few days, your seedlings will be ready for planting, either in pots/containers or in-ground.Notice that you can improve your germination ratios by using gibberellic acid – mostly used for germinating old seeds – auxins and cytokinins or several products like B.A.C. X-seeds , which will improve the germination capacity of your seeds while keeping fungus and other unwanted infections away.If you keep your seeds warm while germinating them, the process will be faster, but remember that the napkins will also dry faster, so you will have to carefully check their humidity level to keep you seeds always humid, but not soaked.

It is better to germinate your seeds keeping them in a warm, ventilated and dark place. Many people use small propagators for a better controlled enviroment, improving their germination results.The periods mentioned in this post are merely orientative; some seeds may germinate in 48 hours, while others may take 10 days or more. Be patient and renew your wet napkins every 3-4 days.

The articles published by Alchimiaweb, S.L. are reserved for adult clients only. We would like to remind our customers that cannabis seeds are not listed in the European Community catalogue. They are products intended for genetic conservation and collecting, in no case for cultivation. In some countries it is strictly forbidden to germinate cannabis seeds, other than those authorised by the European Union. We recommend our customers not to infringe the law in any way, we are not responsible for their use.

How to Germinate Weed Seeds – Tips and Methods

Germinating cannabis seeds isn’t a complicated process, although it does require a few specific parameters in order to happen successfully. If you’re reading up on how to germinate weed seeds, you’re in the right place; it’s a relatively easy process, you just need to have some patience on hand. The first thing to keep in mind is that your seeds are going to need water, heat and air in order to germinate.

See also  Dead Weed Seed

How to Germinate Weed Seeds – Basic Parameters

Water (moisture)

Moisture is one of the three elements required to successfully germinate cannabis seeds; it essentially helps the seeds to expand and therefore break their shell. Over-watering at this stage can be fatal for your seeds, although harder-shelled and older seeds can take longer to soak through, so some patience is required.

Heat

This can be the hardest thing to work with, because temperatures that are either too cold or too hot will mess with your seeds and they won’t germinate. Springtime temperatures are generally what you should be aiming for – seeds can still germinate in colder temperatures, although they can take longer.

How to Germinate Weed Seeds – Germination Methods

There are many different germination methods that growers tend to use, all of which involve water and heat, although they’re not all as effective as others. Some people prefer germinating by planting straight in the ground, using starter cubes or by letting them soak overnight, although our preferred and recommended method is the paper towel method using either plates or an opaque kitchen container. We’re going to give you a brief rundown of the other methods, alongside their pros and cons.

Starter Cubes

This method is more reliable than others, and they make germinating quite easy. All you have to do is place your seed carefully in your seed plug and follow the instructions when watering; different brands and models have different watering instructions.

Some cubes are made out of peat and soil, and you can move them straight into your flowerpot once they’ve popped. However, hydroponic growers can use rockwool cubes which can hold quite a lot of moisture.

One of the downsides to using starter cubes is that they’re not very handy if you only want to germinate one or two seeds, because they’re usually sold in packs of 50 or more, and once they’ve been opened most cubes tend to dry out within a couple of weeks. Another downside to Rockwool specific cubes is that they’re bad for the environment, can be bad for your health when inhaled, and they’re not the best method for new growers.

Direct Planting

Other growers prefer to get rid of the middle man and plant their seed straight into their first flowerpot – it’s essentially how it would be done in nature, so why not follow the natural order? One of the pros when it comes to planting straight in your growing medium is that you don’t have to stress out your little seedling when transplanting, although it can be a bit harder to get the humidity right and you need to bury it just the right amount so that it can sprout.

Overnight Soaking

We highly advise against using this method, as it’s incredibly easy to accidentally drown your seeds. This method involves soaking your seeds in a glass of lukewarm water – it can be any type of cup, although people usually use a normal glass. This method can be effective for much older seeds or for seeds that have abnormally thick shells.

There are a few myths surrounding germinating in water overnight – some people say that if your seeds sink, they won’t germinate, however the truth is that most seeds start off by floating and then as they soak, they sink to the bottom of the glass. This has nothing to do with germination indication.

How to Germinate Weed Seeds – Paper Towel Method

This method is the method we recommend all readers and customers use, as it’s the one that has proven to give us the highest germination rate. We’re going to give an in-depth step by step guide on how to use this method. Keep in mind that you can skip the rooting hormone part if you prefer all natural results, although X-Seed does provide impressive results to start with.

Material Needed to Successfully Germinate seeds

  • Kitchen paper
  • Opaque plastic Tupperware or two plates
  • Viable cannabis seeds

We’re going to go through the X-Seed method – if you want to skip this, you can simply skip the steps involving X-Seed and place your seeds straight into your paper towel as stated in step 4. Before you start, make sure you have everything you need at hand, so that you don’t have to waste any time looking for stuff. Find the best strains at our Cannabis seeds – Buy Marijuana Seeds section.

See also  Weed Seed Korea
Step 1: Soak the seeds

Submerge your seeds in your B.A.C. X-Seed liquid for an hour. Give it a stir every now and then so that the seeds are thoroughly soaked.

Step 2: Germination

While your seeds are soaking, you’ll need to prepare your paper towel and plates (or opaque Tupperware). Make a makeshift “bed” on the bottom plate with damp kitchen paper, but make sure it isn’t soaking. We tend to use 3 layers of kitchen paper; wet the paper and let it dry without wrinkling it, hanging it out kind of like a t-shirt so that all of the excess water can easily drain out. No need to worry about drying it, as you want the kitchen paper to be damp.

Step 3: Separation

After your seeds have been in the B.A.C. X-Seed liquid for an hour, by using a spoon you can carefully extract the seeds from the liquid and spread them evenly across the bottom of your plate or container. An even spread is important, so as the roots of each seed do not get tangled – about an inch apart is good.

Step 4: Cover the seeds

Once you have all of your seeds nicely placed on your plate or in your container, cover the seeds with another layer of damp kitchen paper, similar to the first layer that you put on the bottom. At this point, your seeds should be completely covered.

Step 5: Take care

Once you’ve finished covering your seeds with paper towel, cover them with another plate or put the lid on your container; if doing this in a container, the paper shouldn’t dry out as fast. A mistake made by many growers is that they add too much water to their paper towels if they’ve dried up, but by using a spray bottle you can moisten it some more without overdoing it. If your container is transparent, all you have to do is line the inside so that absolutely no light can get in.

Step 6: Temperature adjustments

Once you’ve isolated your seeds from light, you should leave it somewhere with a nice, neutral temperature. During winter it’s often harder to find a good spot, so you should try and find a heat source that isn’t excessive. You can use a computer modem, or even a softly powered electric blanket. Items like play-stations can get too hot and could end up cooking your seeds, so take care where you put them.

Step 7: After care

Once your seeds open up, they’ll shoot out a small, white root. This means you need to be extremely careful when handling them. Don’t leave them for long because once they’re open they should be moved to soil.

Step 8: Moving to soil

Now that your seeds have officially germinated. Now you need to move them to the medium in which they will remain for the rest of the growing process. Germinated seeds usually grown in soil, but rockwool for hydroponics is also a good option growing. Or even a coco jiffy if you want to cultivate in coco coir. In this article we’ll be dealing with the most common method: planting seeds in soil.

How to Germinate Weed Seeds

Start by filling a small pot with soil, no more than half a liter. Water it before even thinking about planting your seed. Once the soil is damp enough to weigh down the plant pot, use the tip of your finger to create a small 0.5-0.1 cm hole in the middle of the soil, and deposit the seed in the hole with the root facing downwards. Then, cover the seed with a little soil so that it’s just under the surface. The last step in this process is to put your plant pot in the sun or under your lamps (wherever you’re planning on growing it). Within a couple of days you should see that first sprout, that will keep on growing right until the end. In some cases, it may even take a matter of hours.

Keep an eye out on our follow up article on soil preparation for growing cannabis.

See also  Weed Seeds For Sale In Missouri

How To Germinate Cannabis Seeds: A Step-by-Step Guide

“It all starts with a seed.” Learning how to germinate cannabis seeds is essential to all future growing success. Properly popping beans puts you on the road to healthy plants and heavy harvests. But there are a few things to consider in order to master how to germinate cannabis seeds the right way.

Step 1: Choosing Seeds

First, you must decide on what seeds to grow and where to get them. Seek out trustworthy seed companies that have been around and have a track record of successful breeding. Take a look at our High Times Seed Bank Hall of Fame for a list of 50 of the most well-known and accomplished strain creators.

Don’t have seeds mailed to the location where you’re growing or planning to grow. Beginners might want to start with an indica-dominant strain that will stay small and stocky with a short flowering time.

Sativa-dominant strains tend to stretch more and have longer flowering times. If your seeds have been sitting around in storage for a while, check out these tips for germinating old seeds.

Step 2: Sprouting Seeds

Some people choose to use the moist paper towel method to germinate their seeds but I recommend just sowing them directly into the medium you plan to grow in. This reduces any stress the seedling will suffer through the transplanting process and secures the young plant firmly into your chosen mix.

Moist Paper Towel: Place seeds on a plate between two moistened paper towels. Put a plate on top to cover and within a couple of days, you should see the seed cracked open and a taproot emerging. Immediately and carefully (using tweezers) place your seed into your growing medium taproot down and water it in.

There’s nothing inherently wrong with using a moist paper towel, as long as you’re gentle with the emerging tap root and as long as you don’t let the taproot grow too long before planting. My belief is simply to start the plant in its own medium to reduce the likelihood of damaging the tender young roots and shoots.

Straight Into Medium: Poke a hole in your pre-moistened grow medium of choice. Drop your seed in about a quarter- to a half-inch deep. Cover the seed with more of your medium and tamp it down gently.

The important thing is to not plant too deeply and to keep the medium moist and warm for the best germination success rate. Clear plastic wrap placed over the top of the container helps maintain humidity. A heating mat underneath your plastic tray will increase your success rate as well.

Step 3: Seedling Care

Within a few days, you should see a minuscule green shoot emerging from the top of your medium. Immediately get your seedling under adequate grow lighting. Ideally, for the strongest growth rate, you want Metal Halide (MH) lighting, but Fluorescent or LED (Light-Emitting Diode) lighting works fine and won’t produce as much heat.

No matter what lighting you choose, always remember not to keep your grow-light too high above your seedling as this will make it stretch to reach the light and leave your young plant looking long and lanky.Use a timer to make sure the lights are on for at least 18 hours per day. Learning how to germinate cannabis seeds also means treating the emerging seedlings with the proper care.

Temperature and Humidity: You never want your seedlings to dry out. Keep your medium moist but not soaking wet. The air in your grow space should be kept warm, between 70-75 degrees Fahrenheit and with a relative humidity between 50-60 percent.

Use a thermometer/hygrometer to keep track of these factors at all times. As your plant adapts to its new environment, you will see new foliage sprouting forth. Your plants are now well into their vegetative stage of plant growth.

Final Hit: How To Germinate Cannabis Seeds

Now that you know how to germinate cannabis seeds, you’re ready to begin the process of growing your own weed. Just remember, provide light, food and water to your plants when they need it and keep the environment within acceptable levels of temperature and humidity. You’ll avoid so many problems by simply maintaining the proper parameters.

One last tip: Remember to label your seeds, seedlings and clones to avoid confusion and costly mistakes. Now get growing!