Posted on

homemade smoking tools

Homemade smoking tools

Unscrew blade portion of saber and set handle aside. Remove plastic light bulb housing. Apply thin line of superglue to base of plastic cup. Slice top 1″ off the saber blade. Drill 1/2″ hole in second to bottom section of blade. Drill second 1/2″ hole 1 inch above and directly opposite the first hole. Take a 1/2″ straw and wedge a 10mm socket into one end securely. Insert the open end of the straw into the hole at

Using a nail or screw driver, punch a hole in the bottom divot of a glass Sobe bottle and set aside. Cut 1/2″ hole in the lid of the bottle. Wedge a 10mm socket into the hole in the cap. Cover hole in the bottom of the bottle and fill with water. Screw cap back on and fill with weed. Uncover bottom hole and light bowl simultaneously. Once all water has drained, unscrew cap and draw hit through bottle mouthpiece.
It is up to you to channel your inner MacGyver and create a makeshift smoking device they will talk about for decades. Many stoners struggle with trying to be as inventive as the Big Mac himself. This list will help you go from zero to hero in 420 style.

45-degree angle. Fill the bottle with water until the tip of the straw is submerged but ensure the liquid does not reach the first hole. Load the weed into the socket, cover the second hole with thumb and draw through the mouth of the bottle.
Drill a hole in top of the coconut. Drain the milk and set aside. Drill second hole intersecting first in the center of the coconut at
Drill a 1/2″ hole halfway down in the middle of a 2-liter bottle. Make another hole on the opposite side of the bottle from the first and about 2 inches higher. Take a 1/2″ straw and wedge a 10mm socket into one end securely. Insert the open end of the straw into the hole at
Use a straw to core the strawberry. Create a second hole with the straw intersecting the first at
Sometimes, an accident robs you of the only pipe you own and a makeshift option is needed. Other times, you bring weed to a party expecting to find a pipe there already. Either way, two of the three key ingredients for smoking (weed, fire, and a pipe) are present with no hope of the third finding you.

Use a pencil or drill to make hole down the entire center of the core. Create another hole that intersects the first hole at

Sometimes, an accident robs you of the only pipe you own and a makeshift option is needed. Other times, you bring weed to a party expecting to find…

Homemade smoking tools

So, what pipe screen should you use with your homemade bong? And further, what do you do if there are no screens around?

Whether you make your pipe from a soda can or piece of fruit, you’ll want a pipe screen to use with it. If you smoke your weed without a screen, it could be quite an unpleasant experience. A screen keeps the loose bits in your pipe instead of in your mouth, so you can enjoy hitting your bong much more!
Steel screens are often used in silicone bongs and acrylic bongs, although the latter can easily be scratched with these screens. They work just like brass screens, and there is no difference in taste. In fact, aside from their colour, the main difference between these two materials is that steel is more durable.

Glass pipe screens are normally made from a special, heavy-duty type of glass called borosilicate. This heat-resistant type of glass won’t crack from changes in temperature, and won’t shatter as easily as regular glassware. Obviously, screens made from glass are not flexible, so you can’t cut them to size. As such, you need to make sure you get the right size for your bowl. As glass doesn’t wear out, these screens can, in principle, last forever; that is, if you don’t break or lose them.
Since this article is about making a homemade bong, chances are you don’t have any actual pipe screens around. In this case, you can make some DIY pipe screens for single-time use. Here are your options:
This is how most people smoke out of fruit. You can always change things up to make them more pleasant to smoke. If you have a bowl, place it on the top of the apple. Or, you could use the tip of a pen or any other material (that doesn’t melt or release harmful fumes) as a bowl.
Brass screens
The options are endless, try out some and choose your favourites.

Because steel screens are not as malleable as brass, fitting them into odd-shaped bowls can be a little more finicky.

It's 3am and you finally finished that paper. There's not a place open and you still want that smoke before bed. We have the solution for you!