Growing Good Weed From Bad Seeds

Learn how to grow weed indoors with this step-by-step guide that'll teach you exactly how to turn a seed into a smokeable dried flower. Knowing how to grow high-quality cannabis is a treasured skill. Our growing marijuana 101 guide can help you. Learn how to grow a marijuana plant from start to finish…

How to Grow Weed Indoors [Beginner-Friendly Guide]

I’m here to tell you that growing weed indoors step-by-step is easy. Just follow along.

Because it’s the first choice of thousands of beginner growers, I’ve decided to put together the most comprehensive soil weed growing guide on the internet.

In this guide, we will go through the whole growing process, from choosing the seeds and soil to harvesting and curing the buds. Hopefully, by the end of this guide your cannabis growing knowledge will grow as much as your plant.

Contents:

Preparation stage

The first week (or week 0 as I like to call it) is when you prepare your grow.

It doesn’t necessarily have to be a whole week, however it can often be longer.

You might think:

“So, it’s not a week at all?”

And you’d be right.

You won’t be doing any growing this week as you can’t grow plants without the seeds first.

Week 0 is focused around finding the best soil, seeds, lights and setting up your growing tent.

Even if you are growing hydroponic marijuana you have to do the prep stage, which might be even longer for hydroponic setups.

Seeds

For this indoor soil growing guide we will use one of the most popular strains ever: White Widow.

But, we won’t use just any White Widow.

For this occasion we will use the autoflowering version of this plant.

Well, for a few simple reasons:

Autoflowering plants are smaller, but they don’t cut down on the yield, they are easier to grow, and they grow faster than regular plants.

You will want only feminized seeds for this grow as male plants do not grow flowers.

“Your plant is only as good as your soil.”

I find this to be one of the biggest truths of growing cannabis.

Beginner growers often experience problems with their soil, such as malnutrition and over-watering.

Both of these will have a long term effect on your plant if not dealt with in the quickest manner.

This is not to say that cannabis won’t grow in slightly bad conditions, far from that.

It’s called “weed” for a reason. It will grow even in sub-par conditions, however the end result might not be what you hoped for.

So, in order to avoid any confusion, do your best to get the perfect soil, and if you fail, you can still make it up by adding nutrients.

Feel free to buy any of the branded soil mixes, except for those that are labeled “extended release”as they will release nitrogen to your plant roots for up to 6 months, meaning that you will have n0 control over the pH levels of your soil.

The best option out there for first-time growers is “Super Soil”, a special mix of soil that can be found in stores. KindSoil is one of the more popular brands of Super Soil.

With any Super Soil mix you won’t have to add any nutrients, as the mix comes premade, so water will be the only thing you add to it—by watering the plants.

Fun fact:

Did you know that earthworms in soil can increase the yield up to 75%? According to scientists from Netherlands, earthworms might be one of the most important parts of a soil-based grow.

However, this study was done on wheat plants so I wouldn’t suggest you throwing earthworms in the mix if you haven’t had at least a dozen successful grows.

Lighting setup

Lights are super important for growing cannabis and insufficient lighting is one of the biggest reasons why many indoor grows fail.

Lighting depends totally on the size of your grow.

Basically there are 2 most common options for lighting:

  • LEDs
  • CFLs (Compact Fluorescent Lights).

CFLs give off more heat than LEDs and are better suited for growing in small spaces, such as tents.

Their downside is that they tend to spend more energy and you will have to readjust them more often than LEDs.

So, my end recommendation is this: if you have room for LEDs and you are willing to go through the hustle of setting up LEDs, be my guest.

For a small first time grow, I would suggest getting a CFL setup with lights up to 300W.

Keeping CFLs close to the plants will bring in the best yields and ensure the biggest plant growth.

The tent

Growing tents are perfect for those that tend to grow in their garage or colder areas of the house, as the tent holds the warmth within itself, helping plants get bigger as soon as possible.

If you plan on growing marijuana in a closet, or a similar closed space that doesn’t let too much heat out, I would suggest that you approach it with caution.

Either way, the most important thing is to keep the temperature at a constant 25°C (77℉).

In case you do go with a tent, you will have to extract the air from the tent, which is removed using a fan that sucks the air out through tubes.

Most modern tents have a carbon filter which prevents the smell of weed leaving the tent, so keep that in mind when shopping for one.

If you still think you can make do without a tent, then get ready to spend some money on fans and/or ventilation systems.

Most modern air extractor fans include temperature and moisture controllers, which will come very handy when calculating your VPD (we’ll get to that later), so I strongly suggest you get one of those.

Pro tip: if you have cats you are going to want to get a tent. Just trust me on this one. I’m saving you money, effort and a lot of nerves.

Light schedule for growing weed indoors

Light periods for autoflowering plants are really easy to grasp:

All you have to do is keep the light turned on.

Like, all the time.

I am not joking when I say that you should keep the lights on 24/7.

Giving 24 hours of light is crucial when growing autoflowering plants, as it may give them the best chance to grow bigger in the vegetative stage and then eventually flower when their time comes.

Autoflowering plants do not need darkness.

Autoflowering plants are not dependent on changes in the light cycle to commence flowering.

This is why they can be grown using a light cycle of anything from 16 to 24 hours daily.

This is also what makes them perfect for first time growers as light periods are one less thing to worry about.

Germination & seedling stage

Time to put those girls into action!

But first, some more prep.

VPD for weed

Creating the perfect environment for your plants doesn’t necessarily end with buying all the right gear.

You will have to know how to properly set it up, and more importantly, how to make the perfect atmosphere for your plants to grow to their potential.

Dehumidifiers decrease environmental moisture and release heat, which can be helpful in certain cases like very moist and cool areas, such as basements.

If you want know how to grow big buds indoors, you have to understand the importance of VPD.

Whether you are growing weed in a closet or a tent, you will have to control the atmosphere.

Humidity is one of the more important factors to control and this is in part due to the fact that different humidity levels are best for different growing stages.

In general, the air humidity for growing weed indoors is as follows:

One thing which is closely connected to air humidity is VPD.

VPD stands for Vapor Pressure Deficit, and it represents the difference between the pressure of water vapor in 100% saturated air at a certain temperature (leaf’s vapor pressure) and actual vapor pressure in the air surrounding the plant.

Plants with higher VPD values will generally have a higher transpiration rate and increased nutrient movement.

Germinating weed seeds

Learning how to germinate a weed seed is a piece of cake, and also the first step you will take towards your new hobby.

Germinating seeds is a process of forcing them to begin to grow and put out roots.

See also  Weed And Seed Home Depot

Seeds can be germinated in many ways and the first time you do it you will get a hang for it because there isn’t really too much science behind it.

How to germinate weed seeds?

There are several ways to do this.

Germinating seeds in soil

Germinating seeds in soil is the easiest way to do it because all you have to do is toss them in your pot, cover with some dirt and douse with water.

You only need the soil to be damp so make sure you do not over water it. You can use clear kitchen plastic to wrap the tops of the pots to maintain humidity. Keep the pots in a warm area.

Germinating seeds in water

Germinating seeds in water requires even less effort than germinating seeds in soil.

You literally just have to throw them in a cup of water for 14-18 hours.

One thing that makes this way better than germinating in soil is that you can see if a seed is bad by checking if it didn’t sink. Those that sink are good.

After the seeds start rooting, move them on a damp paper towel and cover with another damp paper towel.

Place the paper towel covered seeds in a dark area and they will grow roots in a matter of days.

After that, all you have to do is move them into a pot.

Germinating seeds with paper towels

For this method, you take a couple of seeds, put them on a damp paper towel and cover with another one, after which you store them somewhere dark.

After a few days you should see roots embedded in the paper towels.

You can do this with gauze and cotton wool as well.

Seedling stage

Seedling stage begins once you’ve moved your seeds from the paper towel into the pot and you start seeing the first leaves break out from the ground.

Here’s a photo of a plant a few days into its seedling stage:

That is exactly what your plant will look like maybe a week after you’ve moved the seeds into the pots.

You don’t really have to do much during the seedling stage.

You don’t even have to water the plants too much as you’ll want the soil to be a bit dry so that the roots can catch better.

You might be thinking, “This man is crazy!”, and you’d be right.

But, letting your plant root strong is a great idea during the seedling stage, just make sure you don’t over water and suffocate the plant.

Over-watering is one of the biggest mistakes you can make, but we’ll get to that in a bit.

One of the most important things to remember for the seedling stage is that you will want to move your plants in a bigger pot as soon as you see the first few leafs show.

Knowing how and when to transplant your plants is perhaps the best knowledge we can pass onto new growers, as leaving plants in small pots can choke them up, while moving them too early can have terrible effects, especially if you don’t do it right.

Further along the road you will most likely have to re-pot the plants again.

I strongly suggest you move the plants as soon as you see the first leaves appear.

The second re-potting should happen once your plants have rooted in firmly and appear ready to be moved—this means that the plant looks stable enough to be moved.

Whatever you decide to do regarding re-potting, keep one thing in mind: The less root damage the better.

Vegetative stage

Vegetative stage starts when you see that the plant is looking more like a weed plant than just a regular plant, meaning that it has clear weed-like characteristics.

You will start seeing the recognizable fan leaves and many branches stemming from the trunk, alongside that familiar skunky smell.

Vegetative stage starts roughly around the second week for most autoflowering plants, but for others it might start in the third week.

Either way, once your plant starts growing in size by the day you will know that you successfully reached the vegetative stage.

Watering weed plants

Watering weed plants is a tricky business if you’ve never watered plants in your life.

Most growers water their plants from the tap so there aren’t really any reasons why you shouldn’t do the same.

The amount of water you will use for your plants varies depending on the specifics of your grow and the environment in which you hold the plants.

It also depends on the size of the plant, air temperature, soil composition, water quality and the capacity of your air filtration systems.

However, seeing how this is intended for beginner growers we won’t go in depth too much with watering.

Let me just leave it at these 3 things:

  1. Water whenever you feel that the top of the soil is dry
  2. Bigger pots — water less often, smaller pots — water more often
  3. Make sure you have appropriate drainage (to avoid overwatering)

Pro tip: Get yourself a bottle of carbonated water, and sprinkle the weed leaves. Carbonated water has CO2, which your plants crave.

How to clone weed plants

Similarly to re-vegging autoflowering weed strains, cloning them is extremely hard or next to impossible to do.

This is due to the fact that autoflowering strains have grown in the northern areas of the planet in which they had limited time to flower.

Cloning an autoflowering seed will create a plant of the same age as the mother plant.

Clones share the exact same genetics as the mother plant, which includes their age.

So, if this is your first grow, chances are that you won’t even try cloning a plant.

If you’re growing a photosensitive strain, however, cloning should be a piece of cake.

  1. Contrary to popular opinion, don’t cut off the most bottom node. Cut at least the 2nd or 3rd node.
  2. Fill a solo cup with soil and punch a hole on the top of the soil about 10 cm deep.
  3. Shave off a bit of the skin on the bottom of the cutting so it can form roots more easily.
  4. Stick the freshly cut branch in the hole you just punched and water your new plant.

Cloning weed plants is a great way to save money and keep growing the same plant with great genetics over and over again. You can clone one plant as many times as you want, and the clone of that clone.

Hell, cloning works even with cats.

Flowering stage

Once your plants reach a decent height and size it is time to flower.

Since we are growing an autoflowering strain, you won’t have to put any effort into changing the light schedule or anything.

Once your plant feels the time is right, it will start flowering.

How to know if your plant is male or female?

“Feminized cannabis seeds are bred to contain no male chromosomes, thus ensuring that every plant grown from them will flower as a female and be able to produce the crop of resinous buds sought by most growers”.

But, what happens if you buy random seeds which aren’t feminized?

Well, in that case you will simply have to sprout all the seeds, and wait for them to grow up a bit.

There are some general rules that will help you determine the sex of your weed plant:

  1. Male plants mature faster, most of the time about two weeks before females;
  2. Male plants also have “false buds” which are actually pollen sacs;
  3. Male plants have flowers while females still have pistils at this point.

It is important to keep in mind that cannabis plants can also be hermaphrodites, which means that one plant has both male and female traits.

Pro tip: It is very important that you keep male and female plants separate (or toss the male plants away) as there is a chance that male plants might ruin your grow by fertilizing the female plants.

Post-harvest stage

Most autoflowering plants will show best results around the 11th or 12th week, which is usually a great time to harvest.

But, before you cut your flowers and start drying, here are 2 things to know before you throw away the remaining pieces of the plant:

  • Harvested plants can grow again and bring more crops (unless they are autoflowering strains) by re-vegging the plant;
  • You can still clone the plant that you just cut up as long as there are healthy leaves.
See also  Weed Seed Feed Lawn

Make sure that you don’t rush too much with harvesting, as cannabis needs time to develop higher levels of THC, so harvesting a bit later is a lot better than harvesting too soon.

How to re-veg weed plants

To reveg a weed plant means to send it back to the vegetative phase right after the harvest.

Now, I know I said that we will be using an autoflowering seed for this, and the common knowledge is that autoflowering plants cannot be re-vegged.

However, let us pretend again for a minute that we started with a photosensitive seed, in order to show you how re-vegging works.

You might wonder:

“Why reveg weed when you’ve already harvested the plant?”

There are multiple answers to this question:

  • If you had a great yield and you want to repeat the same results;
  • If you don’t want to spend money on new seeds;
  • If you want the same genetics but different results.

So, in order to re-veg the plants you will first have to harvest it.

  1. Cut off all the bigger branches and just leave the trunk of the plant snapped with a few of the smaller branches remaining
  2. Those smaller branches should have a few flowers on them. From these flowers you will see new leafs appear and grow once the plant starts to re-veg
  3. Put the plant back into the growing room and give it 18 hours of light.

You will see new branches appear from the old flowers and once it hits a decent size, put it back to 12 hours of light and 12 hours of dark so that it may flower.

Most plants that get re-vegged will start growing in a bushy manner rather than straight up as they used to.

This is a slow process so don’t be hasty and take your time taking care of the plant as it is a hard process for the plant as well.

How to dry weed

There are 2 things to keep in mind when drying weed:

  1. The room has to have a certain level of humidity, which is around 50%-60%;
  2. The optimal temperature for your drying room is 21°C (70°F).

For best results, you should dry your buds slowly over the course of 3-7 days.

The drying time depends heavily on the climate in your area. In high-humidity climates the drying process will likely last longer, and vice versa.

Experienced smokers know how a properly dried bud feels in the hand, so if you are not certain don’t be afraid to ask.

Here are a few rules to keep in mind when you’re drying buds:

  1. Keep the area clean and dust-free;
  2. Control humidity and temperature (50%-60% and 70°F or 21°C);
  3. Remove the big leaves and hang the pruned colas and buds upside down on a clothing line or wire;
  4. Keep them properly spaced out, especially in relatively humid drying rooms;
  5. Move the nugs to the curing jars once the twigs start snapping.

Once you’ve moved your buds to the curing jars, the curing process begins.

If you wanna read in depth about drying weed, click here for our full article on how to dry weed.

How to cure weed

Curing marijuana buds is the last step in producing a smokable flower. After curing, your weed will have a much more impressive smell and taste.

Here are some of those big truths about properly drying and curing marijuana:

  • This process breaks down chlorophyll and improves taste and smoothness of the smoke;
  • It will bring out the specifics of your strain when done right, such as the smell and fine flavors;
  • Less chances of mold appearing on your buds.

Check out the photo below for a comparison of well dried and cured weed and poorly dried and cured weed.

Here’s a 5 step tutorial on how to cure weed:

  1. Trim off the smaller leaves and stems that you find remaining after the drying process;
  2. Place the buds in an airtight mason jar, but make sure you don’t cram them up inside. They need some space to cure properly;
  3. Place the jars in a cool, dark place, and make sure there is no sunlight as it breaks down cannabinoids. Make sure you take off the lids every day for 60 minutes to get the fresh air in;
  4. Control the temperature (around 70° Fahrenheit or 20° Celsius) and humidity in the jars around 60% by using humidity packs;
  5. Cure your buds for at least 4 weeks to get the optimal potency and taste, and if you aren’t in a rush you can cure for 6-8 weeks for high-grade buds.

Many people have used small refrigerators for curing weed, as it is fairly easy to control the environment within with heat and humidity packs.

Curing weed in a fridge might be a great way to start if you’ve never done it before.

It is easy, it is convenient as little to no smell is left behind, and there is no way the light will come in.

Go wild

Now it’s up to you to get started and go wild.

Growing weed can be a great hobby for all those that have enough time and passion for smoking cannabis.

Young adults do it all over the US and Canada, just as much as retired folks because it doesn’t require much to be good at it.

Experience is perhaps the biggest factor in growing weed, so don’t be surprised if your first crop doesn’t yield much or the buds don’t look like the ones you buy in a medical dispensary.

These things depend on just about everything, from the strain you are growing to lamps that you use and how long you dried and cured buds after harvesting them.

If you ever get stuck, or things start going south (leaves going yellow, mites problems, etc.) don’t be afraid to ask for help. There are people out there just waiting to hear your problems and see your plants. Many Facebook groups are named “Growers helping growers” so it might be a great idea to join one, just in case you need advice and assistance over the course of your grow.

How To Grow High Quality Plants

Are you in one of the many states that has legalized cannabis? If yes, then you may have found yourself with a new crop to plant in the garden this summer. Growing a new crop can be challenging even for veteran gardeners, but with a little help from your friends at Impello you can avoid some of the common mistakes that lead to a poor crop.

Pick Reliable Cannabis Seed Banks

When purchasing cannabis seeds, you might often choose the cheapest ones to save some bucks. However, the quality may be compromised, and you’ll end up spending more than you have to. That’s why you should pick cannabis seeds with the best genetics. Conduct your research so that you can buy from trusted cannabis seed banks. Cloning can be a good start too — just make sure to get the clones from reputable sources.

Provide Enough Lighting

One essential element for growing cannabis is proper lighting. It’s not only the quality that will be affected but also the speed and size. While marijuana grown outdoors gets natural light, indoor cannabis needs extra care. This means that your usual lightbulbs are not enough to make up for the absence of lights.

Invest in more premium lights, hoods, and reflectors. Get high-intensity (HID) lights, like high-pressure sodium (HPS) or T5 fluorescent lights. You can also use LEDs to save on energy costs. Just make sure to choose full-spectrum LED lights that allow you to modify the wavelength based on the marijuana plant’s needs as it grows.

Enhance Water Quality

Dissolved solids from water can cause adverse effects on your marijuana plant. For instance, domestic water contains chlorine and fluoride. While they will not kill the plant, maximum yield can’t be expected. So, consider using a reverse osmosis system or filtration. Make sure to change the filters regularly. It’s also best to test the water from time to time to check whether the parts per million (PPM) of dissolved solids remain the same.

See also  Free Weed Seeds Samples

Secure Enough Spacing and Ventilation

Wondering how to grow high-quality marijuana? Allow enough spacing between the cannabis buds. Make sure no leaves or branches block the airflow. You can apply low stress training (LST) where you tie the plants down while they’re still young to ensure that the light is well-dispersed, improving the plant’s overall health. Using other tools like filters and fans will also help you maintain the airflow.

Provide Sufficient Amount of Nutrients

One of the 10 steps to growing weed is providing just the right amount of nutrients per growth stage.

Tribus Original is the perfect seedling to harvest cannabis growing products on the market today and it’s very versatile. Usage rates are 1 ml per gallon and with a price tag under $60 for a 250 ml bottle, and a little goes a long way. Because it consists of beneficial bacteria you really can’t overfeed your cannabis plants with it, and it creates stronger plants from the inside out. For best results apply it to your grow media at least once a week. Tribus is compatible with all grow media, including hydroponics and even field application.

In addition to Tribus, these nutrients are necessary when feeding cannabis plants.

Nitrogen, potassium, and phosphorus may be the three main nutrients that your cannabis plants need. However, they also need other nutrients like:

During the flowering stage, various supplements can be beneficial too. These include:

Prune Cannabis Properly

While low stress training does not involve cutting, you have to perform pruning to promote yield increase in plants. It also helps you get rid of buds that are not in their best condition. This way, buds become fewer but larger and healthier. Consider removing the lowest branches to ward off pests. To ensure that the plants recover and grow faster, prune during the vegetation stage.

Keep the Right Room Temperature and Humidity

Cannabis can grow well under several conditions, but you need to ensure that the room’s temperature and humidity satisfy the weed’s needs. Even small changes can affect its growth, so focus on the temperature and humidity in each stage.

Seedling Stage

For seedlings and clones, the preferred humidity levels range from 65% to 80%. This way, they can take up enough water and have stronger roots. In terms of temperature, keep it at 25 degrees Celsius or 77 degrees Fahrenheit during the day and 21 degrees Celsius or 70 degrees Fahrenheit during the night.

Vegetative Stage

In the vegetative stage, moderate humidity levels are necessary. Every week, you can decrease it by 5%. Around 40% to 70% will work. Given that the roots are stronger during this period, they can absorb more water, so lowered humidity levels are preferred. For the temperature, you can raise it a bit — around 71 to 82 degrees Fahrenheit during the day and around 64 degrees Fahrenheit to 75 degrees Fahrenheit at night.

Flowering Stage

Reducing the humidity levels to 40% to 50% is needed during the flowering stage. You can make it 55% but never 60%. Also, the temperature can decrease to 68 to 78 degrees Fahrenheit. Then, in the latter part of the flowering period or one to two weeks prior to harvest, reduce humidity levels from 30% to 40%.

Meanwhile, the temperature can fall between 64 to 75 degrees Fahrenheit or 18 to 24 degrees Celsius with lights on and 16 to 20 degrees Celsius for several nights before harvest. To monitor the humidity and temperature, use a hygrometer and thermometer.

Lowering Temperature

If you aim to lower the temperature, you can do the following:

  • During the day, keep the lights off; during the night, on.
  • Add an air conditioning unit. This can also help reduce humidity.
  • Use a cool tube if you are growing marijuana with HPS lights.

Increasing Temperature

To raise the temperature, you can:

  • Utilize a quality space heater with a thermostat.
  • Use grow lights with higher watts.
  • At the bottom of your grow room or tent, place a heating mat.

Lowering Humidity

If you want to drop the humidity levels, perform these steps:

  • Water your marijuana plants immediately after switching on the lights. Given the quick absorption, humidity levels will decrease.
  • Get a humidifier.
  • Have an airflow fan upgrade to increase the supply of cool air.

Increasing Humidity

Enhancing humidity levels can be possible through the following:

  • Use a humidifier that has enough water reservoir to avoid frequent refills.
  • Using a spray bottle, mist your marijuana plants. However, this shouldn’t be done to flowering plants as it can result in bud rot.
  • Bring larger plants inside the room. Compared to seedlings, they perspire more, raising the humidity levels in the grow room.
  • Consider hanging wet towels inside your grow room.

Maintain Enough CO2

Did you know that providing your marijuana plants with sufficient carbon dioxide (CO2) helps improve their growth by 20%? CO2 is crucial in photosynthesis, where cannabis absorbs light and turns it into energy. Excessive CO2 or a lack of it can be detrimental to your cannabis plants. So, you should know how to provide them with the right CO2 levels. Ideally, it should be above 250 PPM.

To supplement your plants with extra CO2, you can use the following:

    • CO2 generator: To produce carbon dioxide, the CO2 generator burns natural gas or propane. It automatically turns on or off if a certain CO2 level is reached. However, burning the gasses can create heat. So, it’s advisable to use one in a larger grow room.
    • Compressed CO2: With this option, the manufacturer produces the gas and compresses it into a tank. No heat is produced once gasses are released, so you won’t have issues with the temperature and humidity levels. It can also be set to automatic using a controller. Note, however, that both CO2 generators and compressed CO2 can be relatively costly.

    Know When To Harvest the Cannabis Plants

    Harvest time keeps growers excited, especially given all the efforts exerted to produce healthy and quality buds. However, cutting them too soon will defeat the purpose and waste all your hard work as the tetrahydrocannabinol (THC) content will be low. So, harvest them at the right time based on the following indications:

    Dry and Cure Cannabis Properly

    You may think you’re done once you harvest your cannabis. However, drying and curing are important steps to producing quality and tasty buds. First, drying helps reduce the bud’s moisture content to 15%. It also enables you to maintain its taste and the natural compounds in it, including THC. To dry cannabis properly, follow these steps:

    1. Cut down your cannabis plants. While most growers prefer to cut off the branches, some want to cut until the base and hang them upside down. Others will also cut off each bud and then place them on a drying rack.
    2. Trim to remove larger fan leaves. Doing so will contribute to your buds’ improved look. If you’re residing in a place with less than 30% humidity levels, trim fewer leaves.
    3. Begin the slow drying process. A temperature of 65 to 75 degrees Fahrenheit and 50% humidity is preferred. If it exceeds 80 degrees, the terpene content will go away. While hanging the buds upside down is the most common method, you can use a drying rack or cardboard to lay them out. Generally, you need three to seven days to dry the buds well.

    After the drying process, you can now proceed to curing to preserve the plant’s cannabinoids or compounds and terpenes. Simply perform the following:

    1. Put the cannabis buds into mason jars with a wide opening. Other alternatives include plastic or wooden vessels.
    2. Secure the container in a dark and dry area. Humidity levels should range from 60% to 65%.
    3. Check the containers regularly. Open them at least once a day for two weeks. Doing so will remove extra moisture and accommodate fresh air.

    While your cannabis should be ready for use in two to three weeks, keeping it for around two months is recommended for maximum results. Commercial grow operations may prefer to use chemicals to hasten production. However, the whole experience of users may be compromised.

    Conclusion

    There are multiple factors to consider when growing cannabis on your own. However, growing cannabis indoors step by step with our guide above will help you produce quality buds that you’re proud of.