Posted on

gravity bong designs

Attach hose through the top of the cap into the first cylinder (IMPORTANT: hose end should be ABOVE the water line). The other end of the hose, which goes in the second cylinder,r should be submerged under the water. Make sure the cap on the first cylinder forms a very tight seal!

  • 2 feet of clear plexiglass pipe, about 3 inches in diameter.
  • An aluminum or brass stem threaded on one end.
  • A bowl that matches the threads on the stem
  • A drill with a drill bit as big as the stem and a 1/4 inch drillbit (for making the carb hole)
  • Clear silicone caulk.

Drill two holes to fit the clear tubing. Attach hoses. (NOTE: attach as many as you want!) Seal with caulk -let dry overnight. Stick stem through rubber stopper. Fill with water. Place stopper in top. Attach bowl. Destroy lungs!
WHAT YOU’LL NEED:
WHAT YOU’LL NEED:
WHAT YOU’LL NEED:
A basic hookah if you don’t feel like spending over fifty or more for one of those glass jobs.
Easily made and you can also just put on one hose for personal use.

CLICK ON IMAGE OR HERE FOR A LARGER PICTURE!
1. Light up.
2. Start smoking.
3. Close the valve (this cuts off all incoming air).
4. YANK the cord attached to the plastic aerosol top.
This causes a ton of smoke to go into your lungs instantly.

  • An empty 2 liter soda bottle
  • 3 to 5 feet of clear tubing (get at a place that has stuff for aquariums like a pet store).
  • A bowl attached to a long stem.
  • A knife or something similar to cut the holes in the plastic bottle (not so easy)
  • Clear silicone caulk.

How to Build Bongs! The best bong designs in America that you can build yourself. Bongs are your friends!