Posted on

easy grow room setup

Easy grow room setup

If you’ve ever thought about growing cannabis indoors, you may have been faced with a tricky question; should I buy a grow tent or set up a grow room? If you’ve decided to go with the latter, we’re going to go over the basic things you’re going to need to turn a normal room into an indoor grow set up without needing to spend a ridiculous amount of money. Read on to find out exactly how to build a grow room for your cannabis plants.

If you clean your room thoroughly before you start growing, you’ll be able to keep insect and fungi infestations at bay for much longer, which is incredibly important – if your indoor grow room becomes infected it can be quite hard to get rid of it for your next grow.
When it comes to growing cannabis indoors, setting up an entire grow room can be a bit more complicated and costly than a simple grow tent.

In order to set your grow room up properly, we’ve decided to cover it in this post; we’re going to go over the absolute basic materials needed to set up an indoor grow room. Get everything set up without needing to spend too much money.
You may have other options though, depending on the size and set-up of your grow room. Most rooms used for growing only have one window, although if your room has a different set up, feel free to make your own extraction system, this is just the simplest set up.
Once you’ve set up everything else in your grow room that you need to successfully grow cannabis, you’ll need to check that everything is working correctly so that you can germinate your cannabis seeds. Before doing this, you should place a thermos-hygrometer between your lighting systems in order to check the parameters that you’ll be growing at.
The amount of lights and their wattage has a direct impact on the strength of your extraction fan and inline fan.
If you have an inline fan it’s not that hard to attach the ducting, the difference is the size of the intake fan, which is usually smaller than the extractor. You can also do this using clamps to make it easier.

Extractors can be noisy and cause vibrations that can travel through the wall and floor, which can be heard from other rooms and floors. You’ll need to use a soundproofed box in order to avoid this. It’ll have to be attached to the ceiling, and you can use a frame designed for this purpose or a chain system using rubber rings which stop vibrations from travelling up through the ceiling.

If you want to grow cannabis indoors but don't know how to build a grow room, don't worry! We've designed a guide to show you what you need & how to use it

Easy grow room setup

Use a time switch to make things easy for you and create the best lighting experience for your plants.

Think about different scenarios and how you could prevent them. Better act now than in crises.
To make the best out of your lighting use reflective walls. White walls work best for reflecting light, whilst dark or black walls will absorb the light.

There are different nutrients blends that you can use. It will also depend on the growing cycle of your plants, and you’ll need to be careful not to go overboard and burn your plants with too much. Nitrogen toxicity is a common downfall of too many grows.
Best temperature will be 77. Don’t go below 64 and don’t go higher than 86. The lamps should provide enough heat during the day. However consider that you might need extra heating during the night.
Growing indoors will provide you the power to influence all necessary inputs for growing big, healthy, cannabis plants with those big, sticky buds you dream of. This includes lights, nutrients, water and humidity, ventilation as well as temperature. Instead of being dependent on weather and soil you can optimize your production for maximum yield.
Always keep in mind that the general idea is to create an environment where your plants will prosper. The better they carry out their photosynthesis, the better your output in regards of quantity and quality, what growers refer to as “yield”. We will now study in great detail what your plants need:
You can choose LED or HPS/MH lighting for your indoor production. A 400-Watt for vegetative phase and a 600-Watt HPS lamp for flowering phase for every square meter will be a great start. If you can make the investment use LED lamps because they will last forever, and the technology is finally catching up to the HID (HPS and MH) lamps most professional growers have used for years. See our full info on lights here.

Creating the right lighting, air flow, humidity and temperature will change your production output massively. A grow room will provide a unique learning and business experience for you.

Whether starting with a single grow tent, a stealth grow box, or a full scale commercial marijuana grow room, how you set up your growing space goes a long way in determining your final yields. In this chapter we'll cover the 6 most important factors for setting up a successful grow room for your cannabis plants. Grow