Can You Plant Weed Seeds Directly In Soil

A number of plants, particularly vegetables, annuals, and herbs, can be grown from seed. There are many advantages to propagating plants from seed. This publication provides information on seed selection, materials, seeding techniques, thinning, and transplanting. A step-by-step, quick reference guide is also included. In this guide, we’ll walk through the cannabis life cycle. When thinking about growing cannabis,… Feminized Autoflowering Cannabis and Hemp: Direct Sow vs Transplant When you’re new to autoflowering cannabis and hemp farming, it’s best to kick off your operation with all of the necessary

Starting Plants From Seed for the Home Gardener

A number of plants, particularly vegetables, annuals, and herbs, can be grown from seed. There are several advantages to propagating plants from seed. Seeds are relatively inexpensive, allowing the home gardener to get many plants for the price of a few transplants. Additionally, selection of transplants or plant materials available for sale can be limited to just a few varieties. Growing plants from seed allows the gardener many choices for the home garden.

The process of growing more plants from seed is known as sexual propagation. Seed or sexual propagation is dependent upon the genetic combination of male and female parts of the flower and is a result of pollination. Pollen from male anthers is combined with the egg in the female ovary, and seed is produced. Seeds described as “open pollinated” result from random pollination that occurs from wind or insect activity. They may appear to look like the parent plant, but they actually have minor differences that are referred to as “variability.”

Just like people, seeds produce plants that resemble the parent but are genetically different. Seeds referred to as “F1 hybrids” are the result of controlled, known crosses of plants that produce the same results each time. These hybrids often have characteristics that make them a unique or superior plant, such as increased vigor, disease resistance, flavor, flower color, or uniform growth. Hybrid seed may cost more than open-pollinated types. If you save the seeds of hybrid plants, the resulting plants may have some similarities to the hybrid parents, but appearance and growth is usually different. Therefore, if you desire the features of the hybrid plant, purchase and plant new seed each year.

Seeds have three main parts. The outer seed coat protects the seed, while the cotyledons or seed leaves provide a food source during germination. The embryo is the young plant. Mature seeds will germinate when exposed to favorable conditions.

Seed Selection

Start with good quality seed from a reliable dealer. Quality seed is true to cultivar/variety name, and does not contain contaminants, such as weed seed, insect casings, soil particles, or plant pulp. Make the best plant selection for the existing growing conditions by researching the many varieties available. Seed can be purchased for a wide variety of plants and characteristics, such as color, size, and growth habit. Many varieties will even be resistant to certain diseases. Choose varieties suitable for your area that will reach maturity before frost, survive heat, and tolerate present growing conditions. It is best to purchase only enough seed for use in the current season. Seed can be stored from year to year, but germination percentage and seedling vigor will decline with age and improper storage conditions. Store excess seed in a cool, dry place. Seeds in paper packages are best stored in containers that can be sealed tightly. A low-humidity environment at 40 degrees F is best for seed storage, such as the crisper drawer of a refrigerator.

Some seed can be purchased in treated form. One type of treatment is a fungicide coating, which increases the seed’s chance for survival by protecting it from disease organisms in the soil (Figure 1). Small seed may come in a pelleted form, with a coating of clay or other inert material that makes the seeds easier to sow by hand and get a more uniform stand with fewer plants to thin (Figure 2). Legume seed can be treated with nitrogen-fixing bacteria, which help plants draw nitrogen from the air and deposit it in their roots. Similar to hybrid seed, treated seed is also more costly, but can be worth the extra expense.

Reading a Seed Package

Commercial seed packages include a lot of helpful information. Look for the year the seeds were packed, usually printed or stamped on the envelope (will appear as “sell by” or “grown for”). Look for seeds packed for the current season. Additionally, the packet typically indicates how far apart to space seeds within a row, the depth for sowing the seeds, days to germination, and instructions for thinning seedlings. Seed packages can be retained as part of garden records for future reference (Figure 3).

Germination

Germination is the process of the embryo emerging from the seed. It starts with imbibition, or the absorption of water. Germination is heavily influenced by four environmental factors, including water, oxygen, light, and temperature.

Water

Water is critical for the first step in germination. Without water, seeds will remain dormant. The amount of water is critical; too much water causes seeds to rot, and too little water causes embryos to die. Adequate, continuous moisture is essential to germination. Misting seeds with a mist nozzle or a hand-held spray bottle provides light, even, gentle moisture without disrupting seeds. Covering seeds with a thin layer of vermiculite or peat moss helps ensure good seed-to-media contact and helps prevent the embryo from drying out. Keep the humidity high around germinating seeds by covering pots or flats with a clear humidity dome or enclosing plants in clear plastic bags. Remove plastic bags as the seeds germinate and seedlings emerge.

Oxygen

Viable (live) seeds actively respire, releasing carbon dioxide and consuming oxygen. As germination proceeds, respiration increases and more oxygen is needed. Seed-starting media needs to drain well enough to meet this need for oxygen. If the media (i.e., garden soil) is too heavy or too wet, seeds will not have the oxygen they require, and germination may be greatly slowed or stopped (death).

Light

Some seeds require light to germinate, while others require darkness. Some seeds have no preference at all. Look in catalogs and seed packets for specific information for the seeds being grown. If a seed requires light for germination, sow the seeds on the soil surface. If a seed requires darkness, cover it lightly with a layer of fine peat moss or vermiculite.

Temperature

Temperature affects the number of seeds that germinate as well as how fast the seeds germinate. Some seeds have a very specific temperature range for germination, while others will germinate over a broad range of temperatures. Seed packets and catalogs generally list the optimum temperature for germination. A good rule of thumb is 65 to 75 degrees F for germinating most seeds. To monitor soil or media temperature, use a thermometer with its probe in the middle of the container or flat. To raise temperature, use moisture-proof heating mats or cables under flats or containers (following manufacturer’s instructions). Alternately, flats can be placed in warm spots in the home, such as near a radiator, for the germination process. Then move the seedlings to a bright location so they can continue to develop. Monitor temperature and moisture so that embryos and seedlings remain viable. After germination, temperature should be gradually lowered to 65 degrees F.

Materials

Media

Choose a sterile, soilless potting media without fertilizer to start seeds. Sterile mixes are free of weed seeds and disease organisms. Weeds compete with the germinating seedlings for water and nutrients, and disease organisms can kill seedlings in the early stages of germination. Avoid using garden soil as it is heavy, holds a tremendous amount of water, and often contains weed seeds or disease. A good seed-starting media will have a fine, even texture and be fairly uniform. This will help maintain good contact of seed with media. You do not want a seed-starting media that is lumpy or chunky, especially when sowing small seeds (Figure 4).

There are several sterile, soilless materials from which to choose. Sand, perlite, vermiculite, and peat moss are readily available and can be mixed together to create a media that has good moisture-holding capacity and good drainage. Sphagnum peat moss is often combined with perlite for a seed-starting media. A good recipe for making your own media includes 4 quarts shredded sphagnum peat moss, 4 quarts fine vermiculite, 1 tablespoons of superphosphate, and 2 tablespoons of ground limestone. Mix thoroughly, then wet completely. Leave the soil to drain and do not plant for 5 to 6 days. This allows the lime to react with the peat moss and create a favorable environment for the seedlings.

Containers

Figure 5a. Hydrated peat pellets in a flat with humidity dome.

Figure 5b. Recycled plastic sandwich box.

See also  Northern Lights Weed Seeds

Figure 5c. Fiber Pots.

Any container can be used for starting seeds as long as it drains, is deep enough for good root development, and is sanitized prior to use (Figures 5a, 5b, and 5c). Plastic inserts, flats, and trays are available for purchase. Rectangular flats and trays are usually 12 to 18 inches long and often come with a clear, fitted dome or cover. You can make your own flats from wood, but they are heavier than plastic flats and are more difficult to sanitize for reuse. Be sure to leave gaps between the slats, or drill holes in the bottom, for drainage. You can fill the flat directly with media, or use an insert or smaller container set into the flat and filled with media. Growing seedlings in individual cells or containers reduces damage to roots and shock to the seedling when later transplanted into the garden or another container.

You can also make your own containers from recycled materials, such as plastic salad boxes and muffin containers, as long as good drainage is provided and there is adequate depth for root development. The clear plastic containers are like mini greenhouses. When the lids are closed, an ideal high-humidity environment is created for germinating seeds. As the seedlings emerge and grow, the lid can be gradually opened and removed. Pots can also be made from recycled newspaper using a can or bottle as a form, or soil blocks can be made with an initial investment in a molding device.

Additionally, seeds can be started in hydrated peat pellets for easy transplant into the garden (Figure 6). For more information on using peat pellets, view or print the “Starting Plants From Seed using Peat Pellets” information sheet.

Sanitation is critical in the germination process. Disease causing fungi can attack seedlings and kill them at this early stage. To reduce chance of fungal attack, use sterile media and sanitized containers. To sanitize used containers, wash to remove any soil or debris and rinse with a solution of one part chlorine bleach to nine parts water. Rinse thoroughly with clean water.

Location

Providing appropriate air and media temperatures as well as adequate moisture and humidity is important to seed germination. Choose a warm location that provides bright, indirect light and good air circulation. For best results, refer to the information on temperature previously mentioned in the section on germination.

Seeding Techniques

Seeds can be sown directly into the container or space where they will grow, or they can be transplanted to another container or space to finish growing. Most seeds are planted at a depth approximately twice their diameter. Very small seeds should be simply pressed gently into the surface of the soil and barely covered.

To raise the humidity for the germinating seeds, the container can be covered with plastic wrap or placed in a plastic bag, but remove the bag as soon as germination occurs.

Once seeds germinate, you will need to provide supplemental light for proper seedling growth. Light stands should position the lights within 2 to 3 inches of the seedlings. As the seedlings grow, raise the lights, but keep them 2 to 3 inches above the seedlings. Set a timer so that the lights are on 16 hours daily. As seedlings grow, raise the lights above the plants. Without supplemental light, plants will be weak and spindly, often stretching toward a window or other light source.

Direct seeding

Not all plants respond well to transplanting, and for some crops, such as beans, transplanting does not offer benefit enough to pursue. Most large-seeded plants, such as corn and pumpkin, and root crops, such as carrots and beets, are best direct-seeded. Sow seeds directly into the container or place where they will grow, following the recommended seeding depth on the package. Species with small seeds can be more challenging to handle. Carefully prepare the seed bed so that it is smooth and even, and pay close attention during germination and initial growth of the seedlings.

Seeds that can be direct sown:

  • Carrot
  • Oak
  • Lima Beans
  • Sunflower
  • Beet Corn
  • Dill
  • Green Beans

Transplanting

Some seeds are started in a seed bed, transplanted to a secondary container for growth and development, and then transplanted to the container or place where they will grow and finish their life cycle. For example, tomatoes are germinated, transplanted to a flat, grown out for several weeks, and then planted in the garden after last frost. A seed bed may be a small container of seed-starting media, a flat filled with media, or a prepared bed in the garden (though seedlings are at greater risk for insect and disease attack). Seeds can be scattered across the top of the media or sown in rows (Figure 7).

Managing moisture during germination and at the seedling stage can be challenging. You want to keep the media moist so that the embryo does not dry out, but you do not want to overwater. Media that is too wet will cause seeds to rot or seedlings to die. Remember to keep seed-starting media moist to the touch.

While it sounds like a bit of extra work, there are several benefits to germinating seeds in preparation for transplanting. Ultimately, you will end up with the desired number of plants, as opposed to having too few or too many. By germinating in a seed bed and transplanting to the desired flat or container, you do not waste valuable space in your propagation area with containers where seed has not germinated. If you are working with seed whose viability is declining, you can sow extra seed in a seed bed and transplant what actually germinates and is vigorous. This also gives you an indication of when the seed are no longer viable and ready for discard. Growing transplants allows you to make the most of the growing season by having plants ready at the best time for planting outdoors.

Plants that benefit from transplanting:

  • Broccoli
  • Cabbage
  • Tomato
  • Pepper
  • Petunia
  • Pansy
  • Alyssum

Timing

If you are sowing seeds to grow transplants, timing is an important consideration. You want the transplants to be ready for planting in the garden when soil temperatures are appropriate and threat of frost has past. If seeds are started too early, seedlings may be ready for transplant before they can safely be planted outdoors. When timed properly, warm-season plants (i.e., tomatoes, squash, zinnias, and marigolds) are ready to plant outside in the spring garden by the time of last frost. Cool-season plants (i.e., pansies, broccoli, cabbage, and snapdragons) for fall gardens should be planted with enough time to establish and produce before the first frost. Generally, sow seeds 6 to 8 weeks prior to transplant time. For example, if your average last frost date is April 15, sow tomato seeds inside in late-February/early March. For more information, refer to the vegetable planting chart in Vegetable Gardening in Georgia (UGA Extension circular 963).

Thinning Seedlings

Gardeners generally sow more seeds than are desired as a precaution to ensure that the right number of plants is ultimately grown. Especially with tiny seeds, such as pansy or carrot, lots of seeds can end up in a small space. Regardless, seedlings need to be thinned, leaving the remaining plants with enough space between them to grow and develop properly. Even though it can be difficult to remove excess seedlings, crowded plants — plants that are not thinned — are at risk for death from competition for water, light, and nutrients. The spacing information can often be found on the seed packet. Weak or unwanted seedlings can be snipped off with scissors or pinched off at the media level.

Transplanting Seedlings

After germination and the development of the first true leaves, the seedlings can be transplanted to a container of choice. Use a pencil or dibble tool to probe under seedling roots and lift gently (Figure 8). Use the same pencil or dibble to create a hole for the seedling in the new container or location. Seedlings should be set at approximately the same depth they were growing in the seedling flat or pot. Avoid planting too deep or too shallow. Never tug seedlings out of a seed bed or transplant container by grabbing the stem. This can result in a crimped stem, which will result in seedling death.

When ready to be transferred to the garden, the small plants will have several sets of leaves and a sturdy root system (Figure 9).

After transplanting, water the plants thoroughly but gently. Seedlings can dry out quickly so check them daily, especially if they are on a heat mat or heat cables or under lights. Seedlings dry out faster with additional heat. The first few weeks are most critical because root systems are small and developing.

See also  Seeding Weed

Begin fertilizing transplants with soluble fertilizer according to label directions for new transplants. Because new seedlings are easily damaged by excess fertilizer, initial applications are often half of the regular rate. Repeat at two-week intervals after transplanting. Never fertilize plants that show signs of moisture stress, such as wilted or gray-green leaves.

Hardening Off

Plants raised in a high humidity, sheltered location need to be prepared prior to planting in drier, harsher conditions, such as outside in the garden. This preparation process is referred to as “hardening off.” One way to prepare plants is to move them outside to a shady location, gradually increasing the amount of sunlight over a period of several days. You can also choose an overcast day to first take the plants outside, bringing the plants back inside after a few hours. Repeat daily, extending the length of time that plants remain outside by an hour, until the plants have acclimated to the brighter, drier outdoor conditions. This transition can also be accomplished by reducing temperatures (to between 45 and 50 degrees F) and reducing water.

The idea is to slow growth and thicken plant cell walls. Start this process one to two weeks prior to planting seedlings in the garden. Take care to transition plants gradually as extreme changes can slow growth to the point of plant death.

Saving Seed

You may want to save seed from your garden plant. These seeds are the result of random pollination and will most likely not produce plants identical to the parents, particularly with hybrid varieties. Be sure that seed collected from the garden is mature and totally dry before storing. Seeds stored with extra plant pulp or plant material that is not completely dry may mold and deteriorate while in storage. Collected seeds usually have a 65-80 percent germination rate, and three-quarters of those seedlings will produce satisfactory plants.

Quick Guide: Directions for Starting Seeds

    1. Select a container, making sure that it is sanitized, will drain, and is deep enough for root growth and development.
    2. Fill the container with moistened, sterile, seed-starting mix and firm the surface.
    3. Check seed package for planting depth.
      1. Make shallow indentations in the media and sow the seed evenly.
      2. Lightly water the surface, and place the container in a warm area (not in direct sunlight).
      3. As seeds germinate, move seedlings to a well-lit area, such as under fluorescent lights.
        1. The cotyledons, or seed leaves will emerge first.
          1. When two or three true leaves emerge, transplant seedlings into flats or small pots filled with moist potting soil. Keep soil evenly moist.
          1. Allow plants to grow several more sets of true leaves. Keep lights 2 to 3 inches above seedlings, adjusting as necessary.
          2. When plants have reached desired size, prepare them for planting in the garden by “hardening off.”
          3. Water the transplants well initially and for several weeks after planting.

          Status and Revision History
          Unpublished/Removed on Oct 01, 2014
          Published on Oct 09, 2014
          Published with Full Review on Feb 13, 2018

          Sheri Dorn Public Service Associate and State Master Gardener Coordinator; Area: Consumer Ornamentals, Horticulture Bodie V. Pennisi Professor; Areas of Interest: Commercial landscape, Horticulture

          Have a question? Contact your local UGA Extension office to find out how our team of county agents can assist you.

          Germination Guide

          If you are starting with seeds, you’ll have to germinate them to get the grow started. In this chapter, you’ll learn all about the natural conditions that cannabis seeds germinate under and then we’ll show you a failsafe way to germinate your seeds.

          What is germination?

          A cannabis seed is just an embryonic plant enclosed in a protective shell and germination is the process of reactivation of metabolic machinery of the seed. The outer shell splits apart and the embryonic plant emerges as a seedling. For cannabis seeds, this process takes between 1 and 7 days.

          What makes seeds germinate?

          Cannabis seeds lie dormant until they meet the right conditions to begin germination. In tropical conditions, cannabis seeds germinate in the warm rains of early spring. The well-drained soil of the forest floor wouldn’t be waterlogged, but it wouldn’t dry out. The ideal temperatures would be between 70°F-80°F (21°C-26°C), with 60-80% relative humidity. These spring seasonal signals tell the embryonic plant contained in the seed that conditions are right to begin its life cycles. These are the same conditions you will emulate to germinate seeds.

          What’s the easiest way germinate cannabis seeds?

          Peat moss pellets are pucks of dried peat moss enclosed in a fine netting. As a mostly inert medium that retains water well, peat moss pellets do a great job of mimicking the natural conditions of spring jungle floor.

          What you need

          Peat moss pellets – Get them online or at local department/hardware stores – they are widely available.
          Filtered water – You probably have this in your fridge. pH balance between 5.5 and 6.5.
          Cannabis seeds – Learn more about cannabis seeds in our guide

          Step 1 – Flood the Peat Moss

          Peat plugs come dried and compressed, so you need to flood them with water. Use some warm filtered water from your fridge, rainwater, or distilled water that’s pH balanced between 5.5 and 6.5. Add water until the plugs are saturated, then drain the excess water. The plugs will swell 4-5x their original volume.

          Step 2 – Insert Seed

          Most plugs or pellets have a small hole in the top. Insert the seed between 1/4-1/2″ (6-12MM) deep and lightly cover with an excess medium.
          All emerging seedlings look identical, and most mature plants look very similar. If you start multiple strains at once, make sure to label them. Plastic plant labels can be fixed to peat moss plugs to identify the plant through its life – adding dates makes it a self-contained record.

          Step 3 – Wait for it!

          The next few days is mostly a waiting game. Put the pellets in a partially covered container to prevent drying out and follow these two simple rules:

          DO keep the pellets warm and moist throughout germination, cannabis seeds germinate best in these conditions.
          DO NOT flood or over-saturate the pellets after the initial flooding, since this will prevent the roots from getting enough oxygen. Too much water and the seedling will ‘damp out’ and fail.

          One easy method to ensure that you get the right amount of water is to use a spray bottle to wet the outside edges. Another is to quickly dip the bottom of the pellets into the water; moisture will wick upwards to the rest of the pellets. Either method will encourage roots to grow outward.

          Step 4 – Care for it!

          As your young seedling emerges from the seed, you’ll notice that it has a set of ‘built-in’ leaves that don’t look a lot like pointy cannabis leaves. These are the cotyledons, and they are there to help the young seedling bootstrap the photosynthesis process. Young seedlings need light right away – but not too bright for the first few days

          Keep the peat pellet moist until the seedling is ready to plant in a growing medium, but never saturate the pellet since that can drown the young plant. Add water from the bottom up by dipping the pellet quickly in water. This will promote rapid root growth as the roots will grow down after the water.

          When is it time to plant the seedlings?
          You’ll know when it’s time because roots will be bursting out of the bottom of the peat pellet. Plant the pellet in a solo cup sized container using a quality soil mix. Water without nutrients for the first few weeks.

          Optimizations & Alternatives

          Germination Heat Mats

          Germination heat mats are just like heating pads, but they don’t get as hot and are water resistant. These are especially useful for germinating seeds in colder conditions.

          Germination Enclosures

          One of the best ways to simulate tropical climates is to use an enclosure to conserve moisture and heat. You can make your own from cheap plastic containers, or buy a special purpose kit made for peat pellets. Used along with a germination heat mat, you can easily set up a tropical jungle climate anywhere.

          If you want professional results with no hassle and complete stealth, try a professional grow-box.

          Can I germinate seeds in paper towels?

          Yes, you can germinate marijuana seeds in moist paper towels. Just put a damp paper towel down on a plate or other container and spread the seeds around. Add another damp paper towel or fold over the existing towel to cover all the seeds. You will need to keep the paper towels damp at all times throughout the germination process – a spray bottle can really come in handy for that. Covering the seeds with another plate or plastic will prevent it from drying out too quickly, just make sure that there is still some airflow for when the seedling emerges.

          After a few days, the seed will crack and the embryonic cannabis plant will start to emerge. Once you see a solid root begin to emerge, you will need to transplant it into your growing medium. While this approach might be slightly faster than the other methods we’ve shown here, we don’t use this method because of the risk to the plant and main root during transplanting.

          Can I germinate seeds directly in the growing medium?

          That’s how it works in nature and it’s easy to do. Use a solo cup sized container filled with soil or coco and place the seeds about 3/4 inch (~ 2cm) deep. Keep the medium moist but not wet until you see the seedlings emerge between 3 and seven days later. The reason we recommend peat moss over directly planting in soil is that it is easier to control moisture levels in peat plugs due to the texture and qualities of peat. Experienced growers often sew directly into the growing medium.

          Many farmers use rock wool cubes for starting clones and germination, particularly hydroponic growers. While these work well and are economical, they come with drawbacks. We recommend that new growers begin with peat pellets.

          How long does it take to germinate?

          From the time that you place your seed into the germination medium, you should start to see the emerging seedling within 2-5 days. Cannabis seeds germinate faster when they are kept at the correct temperatures, between 70°F-80°F (21°C-26°C), with a 60-80% relative humidity. Cooler temperatures will slow the germination process or stop it altogether. Germination is usually complete, and the plant is a young seedling within seven days. If you warm the seedlings with a heat mat, they can emerge in as little as 24 hours.

          Should I germinate with nutrients?

          Germinating plants don’t need any nutrients; it can burn their new leaves and roots. That’s why it’s best to grow seeds in an inert medium, like peat moss pellets or a paper towel. Young seedlings don’t need nutrients until they are a few weeks old.

          Do cannabis seeds need light to germinate?

          Not really, but they need light within the first day or so of emerging from the seeds, so it’s a good idea to germinate with a light source. Light sources also help increase the temperature, helping the germination process. Sunlight, fluorescent or low powered LED grow lights are all great options.

          What if the seed gets stuck on the seedling?

          They usually loosen and come off after a day or two. If it doesn’t come off, you can try to separate them. The easiest method is to find the direction of the crack and use a pair of tweezers to ‘help’ the seed continue cracking. Be careful that you don’t clamp the seed down or you can clip the folded embryonic leaves.

          Next up, read our seedling care guide to learn how to care for your new seedling.

          Feminized Autoflowering Cannabis and Hemp: Direct Sow vs Transplant

          When you’re new to autoflowering cannabis and hemp farming, it’s best to kick off your operation with all of the necessary information. Arming yourself with knowledge will help ensure that your season will go off without a hitch. Experienced farmers everywhere know that there are differences between direct sowing and transplanting crops. However, how does this difference affect your feminized autoflowering hemp seeds? Let’s take a look at the key differences between these two planting methods and explore potential benefits between direct sowing and transplanting your autoflowering cannabis. Atlas Seed is here to guide you and get your hemp farming season off on the right foot.

          How Do I Best Plant Feminized Autoflowering Hemp and Cannabis Seeds?

          Since feminized autoflowering cannabis and hemp are built for speed it is imperative to get out of the gate fast. Coming to the finish line between 60-70 days from first sowing your hemp seeds means there is no time to stumble. The gas pedal must be pegged at the floor from the first sign of your crop’s emergence. There are two options for hemp cultivators to deploy these fast finishing genetics.

          Direct-Sowing Feminized Autoflower Cannabis and Hemp Seed:

          As the autoflower seed emerges and begins to stake claim on the proximate soil particles it becomes very possessive of this space, not wanting to give up what it has come to own. Disturbing the roots of a feminized autoflower seed is the kiss of ultimate disappointment. An early flowering trigger, most generally induced by drought, light or wind stress on the root zone will lead to a stunted plant and conversely a lower yield. There is a big difference in your bottom line when comparing a 1 to 4 oz bucked flower yield per cannabis plant. By Direct sowing your autoflower seeds into your field, you insure that your hemp plants never have to go through a potentially stressful transplanting event. It is important to remember that soil temperature plays a key role to your direct sowing success. You must wait until the soil temperature is at a sustained 70F. The warmer the soil the better the germination rate and the greater number of seeds will emerge out of the soil. It is important to be aware that direct sowing comes with two potential pitfalls. The first is whether adequate soil moisture levels are present at sowing to help crack the cannabis seed coat and send the cotyledon up to daylight without struggle. A second concern on the minds of hemp cultivators when direct sowing is whether a hard-to-break crust has formed on the surface of the field, usually after a strong rainfall has occurred just after sowing. Soils dominated by clay have a harder time supporting strong emergence rates. Conversely sandy and sandy loam soils lend themselves to greater emergence rates and a greater number of usable autoflower cannabis plants. Currently the best risk mitigation for these concerns is to sow 3x as many seeds as you need usable plants per row. All of this is worth the trouble when you can reliably count on a direct sown seed to produce on average 15-20% more flowers than a transplanted seed.

          Transplanting Feminized Autoflower Cannabis and Hemp Seed :

          Having healthy rooted autoflowering hemp plants going into your field on transplanting day is a great way to insure you have a full stand come harvest. Each bed foot is a valuable income producing piece of real estate. Holes or missing sections are not only difficult to look at but are also eating away at your bottom line. Transplanting autoflowering cannabis and hemp starts is the answer to a full and robust stand. However it does come with an added cost that direct sowing does not have to contend with. The labor, equipment and skill needed to precisely place the cannabis and hemp transplants safely in the soil takes time and costs money. It is important to sow your seed into a floating media transplant plug like an ellepot o r a growcoon . The biodegradable wrapper allows the plug to stay intact while not disturbing the roots when being transplanted 8-10 days after sowing. (insert Atlas seed propagation guide) When propagating the seed in your germination chamber or greenhouse it is recommended to keep your soil temperatures above 75F. When it is time for transplanting it must be done during the cooler parts of the day, excluding the hottest midday temperatures. Close attention needs to be paid to the bed’s soil moisture 24-36 hrs prior to transplanting. The bed needs to be damp so the delicate transplant plug does not succumb to having its moisture wicked away by dry soil, but not muddy, which will significantly slow down the transplanting process. The irrigation system needs to be turned on immediately following the completion of each row to bring the soil water holding capacity up to 100%. Paying close attention to these steps during the transplanting process will ensure your beds are full with ripe colas come harvest.

          We hope that this helps clear the air on some of the main differences between direct sowing and transplanting your autoflowering cannabis and hemp seeds. Atlas Seed is dedicated to providing you with quality information to ensure you can adequately prepare for each season to come. Check back in with us for more pertinent info for your hemp farming operation, and don’t forget to check out our autoflowering feminized seeds while you’re here!

See also  How To Make Oil From Weed Seeds