Posted on

best way to make iso hash

now u will have a very light neon green color liquid in your coffee pot, compeltely clean of any plant material and BS. just pure alcohol and cannaboids.

Standard paper coffee filters.
A Metal screen coffee filter that goes on top of the pot.

get a razor and scrape it all together, it should be a light color looking like maple sugar or sand. it will be sort of powdery at this point. scrape it all free of the pyrex dish and into a neat pile in the middle of the pyrex bowl. preheat your oven to 150-200 degrees and give it about 3-5 minutes in there. what u are doing is heating the oil just enough to melt it together, this is not a decarb for eating it like rick simpson oil, its simply just to melt it together so it will be easier to handle later on.
during summer heat it will all evaporate usually within 24 hours. if u are using 91% in winter temperatures it can take upwards of 5 days to evaporate (the alcohol will go, but the 9% water will take forever, this is why in cooler temps use 99% ISO).
1 large mason jar
once its swirled together and looks oily, let it sit out for a bit to cool off. once it cools off i will harden a little and if u slide the razor under it, it should pop off easily and be fairly easy to handle.
I was an avid bubble bag user but could only achieve full melt on specific strains and then i purchased a ecig vape that took only oil. so i finally bit the bullet and dove into ISO extract. I felt very confident in its safety as i am big on organics and no chemicals. here is the way i do ISO extract to make my hash oil (which ends up like a piece of caramel taffy, not too sticky, able to be handled at room temperature, and bubbles and melts clean when heated)

place your trimmings in the freezer also for the same amount of time.

I was an avid bubble bag user but could only achieve full melt on specific strains and then i purchased a ecig vape that took only oil. so i finally bit…

Best way to make iso hash

Give the mixture a quick and gentle stir for about 30 seconds ensuring all of the plant material has been covered in alcohol and has had the chance to loosen up and grab onto the resin glands we need to extract.

Just add the ice-cold ISO to the pot then swirl around until you see a hint of green then pour quickly through the filter. Add a bit more ISO for a rinse and pour that thru right away too.

Around this time the thickening alcohol and oil mixture will start to bubble as the last of the alcohol gets evaporated out of the oil. Keep your fan close to keep the oil cool but still on the heat, you can also lift the dish off the heat periodically to keep the bubbles to a minimum.

And there we have it folks, quite the process but this is pretty much how I was taught, I have just changed the odd little things around to work better for myself and to also try experimenting with a few different variables.
Hope all of this makes sense for everyone, if you have any questions please feel free to ask. I also hope you all had a great 710 dabbing day!! Dab on folks!
Don’t forget to vote in the monthly contests in the 420 Contest section!
Much too long soaking in the ISO for toking but would be fine for RSO where you want a whole plant extract for medicinal purposes and taste is not a big concern.
@ CBMedzNewb For ISO or other alcohol extractions you want to use very dry pot as the moisture in the pot will help extract unwanted things like chlorophyll into your oil and dilute the alcohol a bit as well.
You’ll have a much better toking experience.

Turn on the hot plate to low-medium heat, place the dish on top of the hot plate and keep a fan near by blowing lightly over the top of the dish to move the evaporating alcohol away from you. Ensure the mixture doesn’t start boiling until you are nearing the end. Keep moving the mixture around every so often to keep the forming oil ring from cooking to the dish.

Hey everyone. I have had a few people asking me about how I make my hash and honey oil extracts so I decided to make a little how to thread on how I make my…