• Good store-bought soil will have perlite or coco added allowing for the ideal balance of air to water retention. Avoid soils that do not have any perlite unless you are purposely buying pure worm castings.
Some of the downsides to using soil found in the ground is that it can be very dense once watered. Restricting root growth during the early stages of a Cannabis plant’s life is never advised, so adding other substrates into your living soil can be very advantageous.
Soil consists of organic material that is in a permanent state of decomposition. Teaming with beneficial microorganisms that are responsible for converting nutrients to the plant’s roots, living soil is Mother Nature’s way of allowing plants to work in a symbiotic relationship. As the tiny microorganisms attach themselves to the root hairs, they are now able to access all the available nutrients and minerals found within the soil web.
• Drainage will be poor, causing the soil to become dense and heavy. This weight can restrict root growth and slow plant development down dramatically. The ratio of water retention, drainage, and wicking capabilities will all be out of balance.
By simply adding a 25-50% ratio of coco coir to your soil, the quality of the mix will become very airy and lightweight. Adding coco will enhance the air pockets present, the wicking action of the medium, as well as encourage a mass expansion in the rhizosphere. Coco is very user friendly and is well associated with large yields. The best thing about adding coco is the fact it is an inert growing medium, so does not have any nutritional value in terms of Nitrogen, Phosphorus, or Potassium, including trace elements.
When growing autoflowering Cannabis plants, it is very important to keep them supplied with nutrients in the form of hard foods, or liquid feeds. Knowing which medium to use and the quality of soil required can really set you on your way to bountiful harvests. Below we better explain what to know, the signs of good and bad soil quality, as well as what you should consider when it comes to planting this year.
Due to the process in which soil is naturally produced, there are a few factors to consider if you are going to prepare your own. If buying soil from a well-known brand, or your local garden center’s cheap and cheerful products then there are some things to consider.
• Bad soil will have an unpleasant smell which is a red flag bad bacteria are present, causing the medium to be in an unfavorable acidic state.
• Worms aerate the soil as they crawl through eating up organic matter. If you see your soil full of worms then do not worry. Not only will these little helpers aerate the soil but will release beneficial bacteria from their gut as they do.
When growing autoflowering Cannabis plants, it is very important to keep them supplied with nutrients in the form of hard foods, or liquid feeds. Knowing which
Autoflowers don’t give you a lot of time, so it’s critical to plan beforehand. What medium are you going to use? Soilless, soil or hydroponics? What nutrients have you chosen? Have you grown autos before? Have you bought the lights? What about ventilation? Have you set up your grow room?
For instance, if your nutrient chart recommends 5ml/liter, start with 2.5ml or 1.25 ml (1/2 or 1/4 strength) and watch how the plant responds. Some autoflowers, like the Tangie ‘Matic or Gorilla Glue, for example, are voracious feeders and require a stronger dose, but make sure you start with big doses only after experimenting with half-strength nutes at first.
It’s common for beginners to load their plants with too many nutrients and burn them. We get that you love your plants, but you’re only harming your autoflowers by feeding extra nutes. Photoperiod plants have bigger roots, but autoflowers are comparatively smaller and the nutrients have to be adjusted accordingly.
2) Don’t take the risk of transplanting
It’s also critical to transplant only after the roots have filled out in the container since the soil will drop off in clumps with the roots stuck to them. In other words, wait until the plant is a little root bound. Since there are so many conditions, it’s best to start directly in the final containers. With no disturbance, you’re all set to get great yields.
If you’re adamant on transplanting, though, make sure that the medium is exactly the same. For instance, if your seedling is growing in a potting mix of coco coir and compost, it should be transplanted to another container containing the exact same mix. Water the seedling container a few hours before transplanting to ensure that the soil is moist. There’s a high risk of hurting the roots when the soil is too dry or wet.
It’s also important to do some research to purchase autoflowering seeds of the highest quality. You can do everything right but it may all be for naught if the strains aren’t meant to produce high yields. For example, Fastbuds catalog shows you seeds ranging from XXL to L yield category, and you can choose anything depending on the space available.
You must also remember to train cannabis plants only during the vegetative stage. Doing so in the flowering phase will stunt the plant drastically. Many growers simply stay away from training autoflowers because they produce good yields even when they aren’t trained; however, a combination of any of the techniques mentioned above will deliver stunning results, which makes training plants a matter of personal choice.
Autoflowers grow even when they get only 12 hours of light from seed to harvest. They are tough and adapt in any situation; however, they thrive when they receive 18 hours of light and 6 hours of darkness. Some growers provide 24 hours of light from the beginning until harvest, but it’s not recommended because plants need some rest and time to recover like the rest of us.
Cannabis growers are always on the hunt to understand the tips and tricks to maximize yields in autoflowers. Most growers have the talent, but they lack information. And that’s a serious handicap…